What should be paid attention to when installing laser cutting machine lens?

Laser cutting is a kind of high-precision mechanical equipment, and the requirements are strict during the use. ‌‌One of the most critical components of the laser cutting effect is the installation of the lens of the laser cutting machine. If the component is not installed in accordance with the prescribed steps, it is easy to cause the cutting center deviation or even the groove edge of the cutting machine is misaligned. So what should be paid attention to when installing the laser cutting machine lens?

1.Wash your hands before operation, it is better to wash your hands with soap or detergent, this is a good habit for normal operation of the cutting machine lens. Do not touch the lens directly with bare hands ,you should wear special gloves to prevent fingerprints from being left on the lens and affecting accuracy.

2.When placing the lens, it should be stable to prevent it from slipping and falling. At the same time, the convex side of the lens should be placed flat on a stable and clean table. At the same time, pay attention to check that the desktop is free of debris, so as to avoid confusion or affect the operating environment of the lens.

3.The lens of the fiber laser cutting machine should be carefully protected against moisture, and the lens can not be wiped by the traditional method of blowing, nor can hot air be used to blow the lens at the same time, so as to avoid the sudden change of heat to damage the lens. The lens belongs to high precision together, and the temperature and humidity are strictly controlled so as not to affect the lens surface protective film and optical accuracy.

4.Laser cutting machine lens assembly after the lens clean and dust, the best use of clean air spray gun clean, do not use ordinary spray gun.

5.The lens of the cutting machine must be kept absolutely clean, and do not touch the lens surface directly with your hands, and strictly prevent other non-designated objects from directly contacting the lens surface. In the cleaning and maintenance of the lens, use professional wipe paper to gently pull from the side to the other side, so as not to scratch the lens surface.

The above are the precautions for installing fiber laser cutter lenses. If you want to know more products, please contact us.

Skype: senfenglaser1

WhatsApp: 0086-13210546543

E-mail: [email protected]

Source link: https://www.sfcnclaser.com/what-should-be-paid-attention-to-when-installing-laser-cutting-machine-lens.html